Ledex Z Purlin


Ledex Z Purlin

Z Purlin 4”

Z Purlin 5”

Z Purlin 6”

Z Purlin 7”

Z Purlin 8”

Z Purlin 10”

Z Purlin 12”

Z Purlin 14”

Z Purlin 4” (45°)

Z Purlin 5”( 45°)

Z Purlin 6” (45°)

Z Purlin 7” (45°)

Z Purlin 8” (45°)

Z Purlin 10” (45°)

Z Purlin 12” (45°)

Z Purlin 14” (45°)

Z Purlin 90°

Z Purlin 45°


  • Ledex Z Purlin are developed with significant improved durability to ensure a maximum degree of precision and consistency.
  • Ledex Z Purlin are hot roll-formed from high tensile zinc coated steel sheets and are supplied in cut to length and pre-punched holes.
  • Due to its lightweight and the high strength of the steel and zinc-coated corrosion protective surface, Ledex Z Purlin are ready for immediate use upon delivery to site. The products produced are all in compliance to major international standards.
  • The high tensile galvanized Ledex Z Purlin are suitable for roofing, wall cladding supports and structural frames of buildings. Because of its light weight, no heavy equipment is required to move them from one place to another, or during the fabrication of the structure.


  • Vertical Sheeting Rails
  • Brickwork Restraints
  • Mezzanine Floors
  • Suspended Ceiling System

Check out our other purlin – Ledex C Purlin

Specification Drawing

Material Specifications

  • Hot dip galvanized steel to JIS G 3302 or AS1397 .
  • Hi-Tensile Grade G450 Minimum Yield Stress.
  • Zinc coating mass from min 180g/m² up to 275g/m².
  • The C Purlin thickness comes in 4 types which are 1.6mm, 2.0mm, 2.5mm and 3.0mm.

Steel Grade: Hot Dip Galvanized High Tensile Steel
Yield Strength: 450Mpa
Coating Available: Z180, Z275
Thickness Available (TCT): 1.60mm, 2.00mm, 2.50mm, 3.00mm

Technical Specification

Specification & Section Properties

Maximum Allowable Span (M)

Punch Hole Guideline

* Custom made position & hole size are also available

Punch Hole Dimension

*Different custom length hole punching is also available


Ledex Purlin Connector

Ledex Tie Rod

Z Purlin Bridging